Brother MFC-9460CDN Toner Cartridges and Parts
The following products are guaranteed to work in the
Brother MFC-9460CDN printer.
Replacing Brother MFC-9460CDN Toner Cartridges
Replacing the Brother MFC 9460cdn toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or your toner.
Before start replacing the toner cartridges keep in mind the following safety recommendations:
- - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
- - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
Step 1: Turn the printer on and open the front cover by pressing the button shown in the picture.
Step 2: Hold the green handle of the drum unit and pull it out until it stops. Keep in mind that you shouldn't leave the drum unit out for too long. If drum unit is exposed to sunlight or room light for a long time, the unit may be damaged.
Step 3: Hold the used toner handle to push it toward the machine to unlock it. Then pull it out of the drum unit.
Step 4: Push to release the latches of the corona wire cover, and open the cover.
Step 5: Clean the corona wire by sliding the green tab from left to right and right to left several times.
Step 6: Make sure you have returned the tab to its initial position, then close the corona wire cover.
Step 7: Unpack the new toner cartridge and shake it from side to side to distribute the toner evenly.
Step 8: Pull off the protective cover.
Step 9: By holding the handle of the toner cartridge, slide it into the drum unit and ull it toward you until it clicks into place.
Step 10: Push the drum unit in and close the front cover.
Product Questions & Answers
We are currently Answering questions in approximately: 30 minutes