Brother MFC 9760 Drum | Best Prices on Brother MFC 9760 Drum Unit

Replacing the Brother MFC 9760 Drum Unit

Replacing the Brother MFC 9760 Drum Unit is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the drum unit or other printer parts.
Here are some easy steps that you can use to remove used Drum Unit and install a new one without damaging your printer or you Brother MFC 9760 Drum Unit.

Before start replacing the Brother MFC 9760 Drum Unit keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used Drum Units or Toner Cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
• - Be careful and don't inhale the toner

Removing the used Brother MFC 9760 drum unit

1. Open the front cover. Pull out the Brother MFC 9760 drum unit assembly.

2. Place the drum unit assembly containing the old toner cartridge on a flat, horizontal surface, and pull the toner cartridge out of the Brother MFC 9760 drum unit assembly while pushing the lock lever down with your right hand.

Installing the new Brother MFC 9760 toner cartridge

3. Unpack the new Brother MFC 9760 drum unit.

4. Install the new Brother MFC 9760 toner cartridge into the drum unit until it locks into place, indicated by a click. When the toner cartridge is installed correctly, the lock lever is lifted automatically.

5. Install the Brother MFC 9760 drum unit assembly into the printer.

6. Reset the page counter referring to the instructions supplied with the new Brother MFC 9760 drum unit.

7. Close the front cover and make sure that the Drum LED is now off.

Replacing the Brother MFC 9760 toner cartridge

Replacing the Brother MFC 9760 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove used toner cartridges and install new ones without damaging your printer or you Brother MFC 9760 toner cartridges.

Before start replacing the Brother MFC 9760 toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
• - Be careful and don't inhale the toner
• - Once you have removed the protection cover from your Brother MFC 9760 toner cartridge, put it immediately in the drum unit to prevent any print quality degradation

Removing the used Brother MFC 9760 toner cartridge

1. Open the front cover. Pull out the drum unit assembly.

2. Place the drum unit assembly containing the old Brother MFC 9760 toner cartridge on a flat, horizontal surface, and pull the toner cartridge out of the drum unit assembly while pushing the lock lever down with your right hand.

Installing the new Brother MFC 9760 toner cartridge

3. Unpack the new Brother MFC 9760 toner cartridge, gently rock it from side to side 5 or 6 times keeping it horizontal.

4. Remove the protective cover.

5. Install the new Brother MFC 9760 toner cartridge into the drum unit until it locks into place, indicated by a click. When the toner cartridge is installed correctly, the lock lever is lifted automatically.

6. Clean the primary corona wire inside the drum unit by gently sliding the blue tab to the right end and left end several times. Return the tab to the home position befora reinstalling the drum unit assembly.

7. Re-install the drum unit assembly into the printer and close the front cover.

Optimize your printing experience with the Brother MFC 9760 Drum

Choose Eco fonts

Eco fonts are great because they are a simple and cheap solution for an office with high print usage. A reduction in toner is achieved by using less toner per letter on text. The trick lies in little holes the font uses, so a lot less toner is used in printing. Generally speaking, the eco fonts do not require any modifications to existing fonts and the software is widely available being easily customizable. In addition, Eco fonts are compatible with all printers.

Save money by choosing draft as default

Most desktop printers are designed to provide above average printing quality. One great option to save money is to default your print to draft quality. Most documents are only read once with little or no need for storage, so why use high quality printing for a document that will be barely read once?

To set up draft quality you must do the following on most Windows based printers:

(a) Click on tools
(b) Options
(c) Print tab
(d) Under print management choose draft
(e) OK
After following these quick steps you will be all set to save on printing and make those expensive little cartridges last a little longer. Bottom line, every drop of ink counts.

Anybody said generic?

70% of the medicines sold in the United States are generic. They contain the same chemical components that brand name medicines do, and they deliver the same results. If people trust their lives to compatibles, why not put this same trust (in a lesser scale) in generic cartridges for their printers? These days the quality of generics can be just as good as OEM quality and best of all, savings can quickly pile up. With a slowing economy, people as well as office managers will find a safe and reliable alternative in compatible toner.

Choose the right printer for your needs

Do you really need that expensive duplex feeder option? How about that fancy display? That storage area for paper reams? Unless your office requires it, there is no need to buy a big work horse for things a pony can do. Try to save on printers by avoiding options you don't necessarily need for your office. Don't buy on impulse, speak with your office manager and find out your print output per week. Get the facts straight and then shop around. Would an inexpensive Brother MFC 9760 drum or a Brother MFC 9800 drum be better for your home or office's needs? Sometimes having the right information can end up saving you money.

Keep in mind the following:

(1) Know your page out per month. Know how much you print and have printed over the past six months. Notice trends and color usage patterns. Ask yourself if you need expensive digital printing. Ponder on whether or not you can do fine with basic average color or if you really need picture quality for your office printer?
(2) Stay away from OEM cost per copy programs, those are designed with a catch and you always end up paying more. You cannot control your use of supplies and the costs far outweigh the benefits. Shoot for a machine that you can control its toner supply.
(3) Does that document need to be printed at all? PDF options and electronic signatures today are the norm. Email the document to the recipient in a PDF form first, and only print documents when absolutely necessary.

(4) Are you controlling and monitoring your color printing? Does anyone keep tabs or watches what is being printed at your office? It is hard to resist employees printing their summer vacation pictures at the company`s expense. A good managed control of the color printer can end up saving big bucks at the end of the year. Use printing wisely.
(5) Try to find printers that have a compatible alternative. This will help you down the line in the future to downsize the cost of toner replacement.

Shop around

Don't just walk into any office supplies store hoping for a bargain. Online shopping is your best bet when looking to save money on ink or find a decent printer.