Replacing the Gestetner DSC338 toner cartridges

Replacing the Gestetner DSC338 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Gestetner DSC338 toner cartridges.

Before start replacing the toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Gestetner DSC338 toner cartridge

1. Open the cover board of the Gestetner DSC338 printer

2. Press the slide of the Gestetner DSC338 toner cartridge, and push it back to the limit

3. Take out the used Gestetner DSC338 toner cartridge

Installing the new Gestetner DSC338 toner cartridge

4. Take the new Gestetner DSC338 toner cartridge out of the box and shake it firmly

5. Put the Gestetner DSC338 toner cartridge into the printer

6. Pull the Gestetner DSC338 toner cartridge forward, press the lock to put it on place and close the cover board

Related offers: Ricoh Aficio 2232c Toner | Ricoh 2238c Toner | Savin C2820 Toner | Savin C3224 Toner | Savin C3828 Toner | Gestetner Dsc338 Toner | Gestetner Dsc332 Toner | Lanier LD232c Toner | Lanier LD238c Toner | Lanier LD228c Toner