Replacing the Gestetner DSC432 toner cartridges

Replacing the Gestetner DSC432 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Gestetner DSC432 toner cartridges.

Before start replacing the toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Gestetner DSC432 toner cartridge

1. Open the cover board of the Gestetner DSC432 printer

2. Press the slide of the Gestetner DSC432 toner cartridge, and push it back to the limit

3. Open it from outside and take out the used Gestetner DSC432 toner cartridge

Installing the new Gestetner DSC432 toner cartridge

4. Take the new Gestetner DSC432 toner cartridge out of the box and shake it firmly

5. Put the Gestetner DSC432 toner cartridge into the printer

Related offers: Ricoh Aficio 3224c Toner | Lanier LD124c Toner | Lanier LD132c Toner | Gestetner Dsc424 Toner | Gestetner Dsc432 Toner | Savin C2410 Toner | Savin C3210e Toner