Replacing the Gestetner Dsc 445 Toner Cartridges

Replacing the Gestetner Dsc445 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Gestetner Dsc 445 toner cartridges.

Before start replacing the Gestetner Dsc 445 toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Gestetner Dsc 445 Toner Cartridge

1. Open the cover board on the right side of the printer.

2. Press the slide of the Gestetner dsc445 toner cartridge, and push it back to the limit.

3. Open it from outside and take out the used gestetner dsc 445 toner cartridge.

Installing the new Gestetner Dsc445 Toner Cartridge

4. Take the new gestetner dsc445 toner cartridge out of the box and shake it firmly.

5. Put the cartridge into the printer.

6. Pull the cartridge forward, press the lock to put it on place and close the cover board.

 

 

 

Related offers: Ricoh 3228c Toner | Ricoh 3235c Toner | Ricoh 3245c Toner | Savin C2824 Toner | Savin C3528 Toner | Savin C4535 Toner | Lanier LD328c Toner | Lanier LD335c Toner | Lanier LD345c Toner | Gestetner Dsc428 Toner | Gestetner Dsc435 Toner | Gestetner Dsc445 Toner