Replacing the Gestetner MPC2800 Toner Cartridges

Replacing the Gestetner MP2800 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Gestetner MP C2800 toner cartridges.

Before start replacing the Gestetner MPC2800 toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Gestetner MP C2800 Toner Cartridge

1. Open the cover board on the right side of the printer.

2. Take out the used gestetner mpc2800 toner cartridge.

Installing the new Gestetner MPC2800 Toner Cartridge

3. Take the new gestetner mp c2800 toner cartridge out of the box and shake it firmly from 5 to 6 times.

4. Put the new gestetner mpc2800 toner cartridge into the printer and close the cover board.

 

 

 

Related offers: Gestetner MP C2800 Toner | Lanier LD528c Toner | Lanier LD533c Toner | Ricoh MP C2800 Toner | Ricoh MP C3300 Toner | Savin C2828 Toner | Savin C3333 Toner