Replacing the HP Laserjet 1020 toner cartridges

Replacing the HP 1020 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you HP Laserjet 1020 toner cartridges.

Before start replacing the toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Installing the new HP 1020 toner cartridge

1. Remove the black protection sheet attached to the HP Laserjet 1020 toner cartridge.

2. Rock the HP 1020 toner cartridge 5 or 6 times as shown in the illustration.

3. Remove the sealing tape by gently pulling out the orange tab.

CAUTION: Do not shake the cartridge because it may spill some toner

4. Insert the HP Laserjet 1020 toner cartridge into the printer.

5. Insert securely the HP 1020 toner cartridge into the printer.

Related offers: HP 3015 Toner | HP 1010 Toner | HP 1012 Toner | HP 1020 Toner | HP 1015 Toner | HP 3020 Toner | HP 3030 Toner