Konica Minolta Magicolor 5670EN Toner Cartridges
Compatible & Genuine Toner Cartridges and Printer Parts Available
10 years of experience supplying high quality toner cartridges.
One Year Warranty
All purchases are covered by a 1 year warranty against defects.
Free No Hassle Returns
Easy process and free shipping on returns.
96% of our orders are shipped the very same day.
OEM Toner Cartridges
OEM A06V133 A06V433 A06V333 A06V233 |Page Yield 12,000$965.95
OEM A06V132 A06V432 A06V332 A06V232 |Page Yield 6,000$710.95
OEM A06V133 |Page Yield 12,000$131.95
OEM A06V433 |Page Yield 12,000$285.95
OEM A06V333 |Page Yield 12,000$285.95
OEM A06V233 |Page Yield 12,000$285.95
PARTS FOR Konica Minolta Magicolor 5670EN
OEM A03105F A0310AF A0310GF |Page Yield$705.95
Questions about the Konica Minolta Magicolor 5670en Printer.
Q: My printer is saying ‘incorrect toner detected’
A: There are three possibilities for this issue to be happening. First of all check that you have installed the right color to its right spot, every cartridge has a chip that help the machine recognize its color, you should insert the black cartridge into the black stop, otherwise the printer won’t work. Check the laser lenses, if they’re dirty you have to clean them. And finally, check that the toner you bought is actually the right cartridge for your printer. Some Konica Toner Cartridges are similar in the outside but the chip is specific for each printer.
Q: My Konica 5670en is printing blue images as green, what can I do?
A: You have either a defective cartridge or a problem with the drum unit or fuser unit.
Q: I have just replaced the Magicolor 5670en Toner but the printer keeps saying toner missing. Any ideas?
A: First of all check that you have installed the cartridge correctly, that you’ve removed all the tapes covering the cartridge. If the cartridge is properly installed then try cleaning the laser lens.
Q: I have replaced the black toner cartridge on my Konica 5670en printer, but it keeps sayin K toner is out... How can I fix this?
A: First of all check if the cartridge is properly installed, if it is, try cleaning the laser lens. If it doesn’t work then either the new cartridge is defective, the chip is not working properly or both of them are defective.
Q: I’m having issues when printing in color with my Konica Minolta Magicolor 5670en. First there were too much yellow and now there is too much red. Do I have to replace the cartridges.
A: It sounds like a problem with the drum units. Try replacing both magenta and yellow.
Ask Joe a question about Konica Minolta Magicolor 5670en toner cartridges:
Replacing the Konica Minolta Magicolor 5670EN Toner Cartridges
Replacing the Konica Minolta Magicolor 5670en toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Magicolor 5670en toner cartridges.
Before start replacing the toner cartridges keep in mind the following safety recommendations:
- Do not burn or throw used toner cartridges into open flames, as this may cause a fire.
- If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains.
1. Open the front cover and pull the lever of the magicolor 5670en toner cartridge that you want to replace to the right. Then lower the lever to unlock the cartridge.
2. Take the cartridge out of the printer.
3. Remove the new toner cartridge from the bag.
4. Gently shake the toner cartridge three times to distribute the toner evenly.
5. Insert the new toner cartridge and peel off the protective film.
6. Raise the lever to its original position and pull it to the left to lock it in place.
7. Close the front cover.