Replacing the Lanier LP036c toner cartridges

Replacing the Lanier LP036c toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Lanier LP036c toner cartridges.

Before start replacing the toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Lanier LP036c toner cartridge

1. Open the cover board of the Lanier LP036c printer

2. Press the slide of the Lanier LP036c toner cartridge, and push it back to the limit

3. Open it from outside and take out the used Lanier LP036c toner cartridge

Installing the new Lanier LP036c toner cartridge

4. Take the new Lanier LP036c toner cartridge out of the box and shake it firmly

5. Put the Lanier LP036c toner cartridge into the printer

Related offers: Ricoh Aficio CL5000 Toner | Lanier LP036c Toner | Savin CLP1036 Toner | Gestetner C7010 Toner