Replacing the Lanier LP138c Toner Cartridges

Replacing the Lanier LP138c cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Lanier LP138c toner cartridges.

Before start replacing the Lanier LP138c cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Lanier LP138c Toner Cartridge

1. Open the cover board on the right side of the printer.

2. Press the slide of the Lanier LP138c toner cartridge, and push it back to the limit.

3. Open it from outside and take out the used Lanier LP138c toner cartridge.

Installing the new Lanier LP138c Cartridges

4. Take the new Lanier LP138c toner cartridge out of the box and shake it firmly.

5. Put the cartridge into the printer.

6. Pull the cartridge forward, press the lock to put it on place and close the cover board.

 

 

 

Related offers: Gestetner Dsc38 Toner | Lanier LP138c Toner | Lanier 2138 Toner | Lanier LP235c Toner | Ricoh AP3800c Toner | Ricoh CL7000 Toner | Savin CLP28 Toner | Savin SLP38c Toner