Replacing the Lexmark E352 toner cartridges

Replacing the Lexmark E352 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Lexmark E352 toner cartridges.

Before start replacing the toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Installing the new Lexmark E352 toner cartridge

1. Remove the black protection sheet attached to the Lexmark E352 toner cartridge

2. Rock the Lexmark E352 toner cartridge 5 or 6 times as shown in the illustration

3. Remove the sealing tape by gently pulling out the orange tab

4. Insert the Lexmark E352 toner cartridge into the printer

5. Insert securely the Lexmark E352 toner cartridge into the printer

 

 

 

Related offers: Ricoh Aficio SP3300dn Toner | Lexmark E250 Toner | Lexmark C935 Toner | Lexmark E350 Toner | Lexmark E352 Toner