Replacing the Oki C7200 toner cartridge

Replacing the Okidata C7200 toner cartridge is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove used toner cartridges and install new ones without damaging your printer or your Oki C7200 toner cartridges.

Before replacing Okidata C7200 toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Oki C7200 toner cartridge

Installing the new Okidata C7200 toner cartridge

2. Unpack the new Oki C7200 toner cartridge and shake it 5 or 6 times. Hold the cartridge in a horizontal position and remove the tape and stooper. Hold the cartridge at an angle and lower the end opposite the locking lever inton the drum unit so that the tube (1) on the drum unit slides in the opening (2) in the toner cartridge.

3. Lower the end of the Okidata C7200 toner cartridge with the locking lever, aligning the white tab (3) with the groove (4) in the drum unit.

5. Push the locking lever (5) toward the back of the printer until it stops.

6. Use the lens cleaning pad to wipe each LED array clean. Close the cover and turn on the printer.

Related offers: Konica 7812 Toner | Konica 7820 Toner | Oki C7100 Toner | Oki C7200 Toner | Okidata C7300 Toner | Oki C7400 Toner | Oki C7500 Toner | Xerox Phaser 1235 Toner