Oki C7200 Toner | Unbeatable Prices on Okidata C7200 Toner

Replacing the Oki C7200 toner cartridge

Replacing the Okidata C7200 toner cartridge is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove used toner cartridges and install new ones without damaging your printer or your Oki C7200 toner cartridges.

Before replacing Okidata C7200 toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains

Removing the used Oki C7200 toner cartridge

1. Turn the printer off and open the cover. Push the locking lever (1) toward the front of the printer until it stops. Lift the right end of the Oki C7200 toner cartridge (2) up and slide it out of the drum unit.

Installing the new Okidata C7200 toner cartridge

2. Unpack the new Oki C7200 toner cartridge and shake it 5 or 6 times. Hold the cartridge in a horizontal position and remove the tape and stooper. Hold the cartridge at an angle and lower the end opposite the locking lever inton the drum unit so that the tube (1) on the drum unit slides in the opening (2) in the toner cartridge.

3. Lower the end of the Okidata C7200 toner cartridge with the locking lever, aligning the white tab (3) with the groove (4) in the drum unit.

5. Push the locking lever (5) toward the back of the printer until it stops.

6. Use the lens cleaning pad to wipe each LED array clean. Close the cover and turn on the printer.

 

 

 

Related offers: Konica 7812 Toner | Konica 7820 Toner | Oki C7100 Toner | Oki C7200 Toner | Okidata C7300 Toner | Oki C7400 Toner | Oki C7500 Toner | Xerox Phaser 1235 Toner

Optimize your printing experience with the Oki C7200 toner

Choose Eco fonts

Eco fonts are great because they are a simple and cheap solution for an office with high print usage. A reduction in toner is achieved by using less toner per letter on text. The trick lies in little holes the font uses, so a lot less toner is used in printing. Generally speaking, the eco fonts do not require any modifications to existing fonts and the software is widely available being easily customizable. In addition, Eco fonts are compatible with all printers out there.

Save money by choosing draft as default

Most desktop printers are designed to provide above average printing quality. One great option to save money is to default your print to draft quality. Most documents are only read once with little or no need for storage so why use high quality printing for a document that will be barely read once?

To set up draft quality you must do the following on most Windows based printers:

(a) Click on tools
(b) Options
(c) Print tab
(d) Under print management choose draft
(e) OK
After following these quick steps you will be all set to save on printing and make those expensive little cartridges last a little longer. Bottom line, every drop of ink counts.

Anybody said generic?

70% of the medicines sold in the United States are generic. They contain the same chemical components that brand name medicines do, and they deliver the same results. If people trust their lives to compatibles, why not put this same trust (in a lesser scale) in generic cartridges for their printers? These days the quality of generics can be just as good as OEM quality and best of all, savings can quickly pile up. With a slowing economy people as well as office managers will find a safe and reliable alternative in compatible toner.

Choose the right printer for your needs

Do you really need that expensive duplex feeder option? That fancy display? That storage area for paper reams? Unless your office requires it, there is no need to buy a big work horse for things a pony can do. Try to save on printers by avoiding options you don't necessarily need for your office. Don't buy on impulse, speak with your office manager and find out your print output per week. Get the facts straight and then shop around. Would an inexpensive Oki C7200 toner or a Oki C7100 toner be better for your home or office's needs? Sometimes having the right information can end up saving you money.

 

Keep in mind the following:

(1) Know your page out per month. Know how much you print and have printed over the past six months. Notice trends and color usage patterns. Ask yourself if you need expensive digital printing. Ponder on whether or not you can do fine with basic average color or if you really need picture quality for your office printer?
(2) Stay away from OEM cost per copy programs, those are designed with a catch and you always end up paying more. You cannot control your use of supplies and the costs far outweigh the benefits. Shoot for a machine that you can control its toner supply.
(3) Does that document need to be printed at all? PDF options and electronic signatures today are the norm. Email the document to the recipient in a PDF form first, and only print documents when absolutely necessary.

(4) Are you controlling and monitoring your color printing? Does anyone keep tabs or watches what is being printed at your office? It is hard to resist employees printing their summer vacation pictures at the company`s expense. A good managed control of the color printer can end up saving big bucks at the end of the year. Use printing wisely.
(5) Try to find printers that have a compatible alternative. This will help you down the line in the future to downsize the cost of toner replacement.

Shop around

Don't just walk into any office supplies store hoping for a bargain. Online shopping is your best bet when looking to save money on ink or find a decent printer.