Replacing the Samsung ML 1210 Toner Cartridges

Replacing the Samsung ML 1210 toner cartridge is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove used drum unit and install new one without damaging your printer or you Samsung ML 1210 toner cartridge.

Before replacing Samsung ML 1210 toner cartridge keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
• - Be careful and do not inhale the toner

Removing the used Samsung ML 1210 toner cartridge

1. Grasp the front cover at both sides and pull it toward you to open.

2. Remove the Samsung ML 1210 toner cartridge from the printer.

Installing the new Samsung ML 1210 toner cartridge

3. Take the new Samsung ML 1210 toner cartridge out of the bag.

4. Gently shake the Samsung ML 1210 toner cartridge from side to side five or six times to redistribute the toner.

5. Insert the Samsung ML 1210 toner cartridge into the printer. Insure the toner cartridge snaps into place.

6. Firmly close the cover.