Replacing the Samsung ML 2252w Toner Cartridges

Replacing the Samsung ML 2252w toner cartridge is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove used drum unit and install new one without damaging your printer or you Samsung ML 2252w toner cartridge.

Before replacing Samsung ML 2252w toner cartridge keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
• - Be careful and do not inhale the toner

Removing the used Samsung ML 2252w toner cartridge

1. Open the front cover.

2. Lightly pull the Samsung ML 2252w toner cartridge straight out.

Installing the new Samsung ML 2252w toner cartridge

3. Unpack the new Samsung ML 2252w toner cartridge and hold the toner cartridge by the handle and gently roll it from side-to-side to distribute the toner evenly inside the cartridge.

4. Align the Samsung ML 2252w toner cartridge with the labeled arrows, then slide it into the multifunction printer until it locks firmly into place.

5. Close the front cover.