Konica Minolta Magicolor 4650DN Toner Cartridges and Parts
The following products are guaranteed to work in
the Konica Minolta Magicolor 4650DN printer.
|Questions about products for this printer?|
Replacing the Konica Minolta Magicolor 4650DN toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or your toner.
Before start replacing the toner cartridges keep in mind the following safety recommendations:
- - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
- - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
- - Don't touch the OPC drum durface, since this could lower image quality
Step 1: Open the printer's front cover.
Step 2: Pull the front lever of the used cartridge to the right.
Step 3: Lower the lever to release the cartridge.
Step 4: Grab the handle of the toner cartridge and pull it out.
Step 5: Remove the new toner cartridges from its packaging and shake it to distribute the toner evenly.
Step 6: Insert the new toner cartridge into the machine.
Step 7: After the toner cartridge is securely installed, peel off the protective film.
Step 8: Raise the front lever to its original position.
Step 9: Pull the lever to the left in order to lock it in place.
Step 10: Close the front cover.
Can't find the answer you're looking for? Ask a question, we're happy to help you!
We are currently Answering questions in approximately: 30 minutes